Wednesday's Alcohol Ink class was truly a Blast! There is so much to show you so I'll start off with photos.
Adirondack Alcohol Inks, from Ranger, are solvent inks which dry quickly on non-porous surfaces such as plastic, glass, metals, acetate, gloss paper, (not photo paper through), shrink plastic, velum and more. So, right away you can see that these 48 translucent inks are special! In addition there are four shades of mixatives, gold, silver, copper and pearl. Just one drop of the mixatives goes a long way to adding metallic highlights to your art projects.
There are a few companion products to work with the inks. There is a wooden ink applicator which you apply rectangles of felt to. Because the felt is easy to replace you do not need 48 handles, just extra felts which are available. Another essential product is Alcohol Blending Solution which will do three things; blend, lighten and erase. The Blending Solution is very important in Alcohol Ink art!
Below you can see TommaLou applying Alcohol Ink to glossy card stock as Janice is about to ink her felt. To safely ink always place the tip of the bottle directly onto your felt before squeezing for a count of 1,2. You can ink right away, or add Blending Solution to your inked felt before you apply it to your art surface.
In this next photo Becky has almost completed inking her dry embossed card front. The speckled tags to the left of Becky's hand where created by adding several spots of ink to a clean felt and tapping randomly on glossy card stock using NO Blending Solution.
This grouping below is some of the colorful tags and a clock embossed card which was inked Wednesday. To achieve the bright, bleeding effect on the center tags Blending Solution was added to the inked felt before applying it to card stock. Plus, one or two drops of Blending Solution was also dripped onto the already inked tags and allowed to bleed out. Amazing look don't you think?
The two dry embossed tags were punched out of aluminum soda cans. Because they are slick and non-porous the inks blend perfectly on them. Don't you just love the bright shades?! There are endless possibilities for color combinations!
We used another fun tool, the Alcohol Ink Fillable Pen to color in our stamped images on our flower tag. It was prepared by die cutting the large scallop tag out of acetate and sage card stock. On the back of the acetate tag, with Jet Black StazOn® SZ31JBLK solvent ink, we stamped both the Kindergarten Daisy 7058G and small Beauty Fly 4064B. Gave the ink a few minutes to dry then turn tag over and stamped Marvelous Nature 3353E on the front. All stamp images may be found on our web site, stampofexcellence.com. If you look back at the first picture you will see some prepared Fillable Pens some with colored rings, some white. You can actually pull the brush tip out of the pen and add 3 to 5 seconds worth of ink or Blending Solution to the pen. Let rest flat a moment and add more ink. Fill several times then replace nib and lay flat for 5 minutes to allow the ink to wick into both ends. The colored pens can be inked on the white band to reflect the ink inside. These pens are ready to use like any other markers but they are more fun because they have both a brush tip and fine point ~ two pens in one!
You May also note the paint pallet trays in the first photograph. These were created by placing several drips on Alcohol Ink into the cups and allowing them to dry. Now you can use your Fillable Pen with the Blending Solution inside to pick up the dried ink from the pallet and color as before. It truly is fun and there are so many blendings of color that you can create! The reason we stamped the items to be colored in on the back is because the Alcohol Ink and Blending Solution would erase the StazOn® if we applied it directly to the ink. The quote was stamped on the front so it would read correctly.
I know once you give these pens a try you will be delighted with the results as all of us were using them for the first time!
This next part of the class was more fun then there are words to express. On a glossy surface, (we used gloss card stock and a 4 inch tile), drop 1 to 2 drops of a bright Alcohol Ink and immediately give it a blast from the straw of canned air, (like you use to clean keyboards). The ink shoots out in these wild and crazy spiky directions! Just keep adding drops and blast until you are thrilled with your results. You can see from Becky's photo you might want to stand to do this art. The trick is to blast the ink right away before it can start to dry!
Here is a finished tile. Once dry, only a few moments, you can add a top coat of Royal Coat Dimensional Magic™ RCDM2051 to give a crystal clear hard finish.
Janice was very patient in her spraying efforts. While the rest of us were happily blasting away she was ever so carefully blowing her ink in exact directions to control the end results. I had no idea she was such an artist before the class. Way to go Janice!
We all loved this master piece. Because of all the forest fires in ours and surrounding states we called this work of art "Fire Mountain". Pretty cool hua?!!
One last photo to show some of our favorite Alcohol Ink supplies and finished art works. Once again we used Jet Black StazOn® SZ31JBLK ink to image our Royal Monarch 4050J, Soar 3322B and Follow Bliss S230C. StazOn® gives such a solid image and is exactly the ink you want on glossy card stock.
Now that you have seen just some of the creative directions you can go with Alcohol Ink and it's support supplies, I am sure you will want to give it a try for yourself. The fun thing about this style art is that no two pieces will ever be the same. This is truly art that becomes what it wants to be.
Thanks for checking out our class. Hope you enjoyed it!
To add color to your life I hope you drip some Alcohol Inks and give them a blissful blast for yourself!
Judi